Supply in Kazakhstan
KEG TRK supplies vibration monitoring and analysis solutions (Bently Nevada) across Kazakhstan: Almaty, Astana, Karaganda, Ust-Kamenogorsk, Aktobe and other regions. Official warranty, monitoring system design, installation, commissioning and personnel training.
Mining equipment
Key features
Applications and resources
Industry solutions, landing pages and articles about 3500/64M Dynamic Pressure Monitor
Where it is used
Typical tasks
- Reciprocating compressors
- Recycle compressors
- Pulsation analysis
Integrated monitoring: ultrasonic diagnostics · motor monitoring · implementation services
Description
The 3500/64M Dynamic Pressure Monitor is a four-channel 3500 rack monitor for high-temperature pressure transducers. There is one measured variable per channel, band-pass dynamic pressure; corner frequencies and an extra notch filter are set in 3500 Rack Configuration Software.
Specifications (datasheet 141536)
| Parameter | Value |
|---|---|
| Channels | 4 channels in a single slot |
| Input | high-temperature pressure transducers |
| Measurements | band-pass dynamic pressure; configurable corner frequencies and notch filter |
| Applications | combustor pressure pulsations ("humming") in gas turbines |
Supply in Kazakhstan
KEG TRK supplies the 3500/64M and its I/O modules and helps with 3500 rack configuration and commissioning across Kazakhstan.
Technical specifications
| Channels | 4 channels in a single slot |
| Input | high-temperature pressure transducers |
| Measurements | band-pass dynamic pressure; configurable corner frequencies and notch filter |
| Applications | combustor pressure pulsations ("humming") in gas turbines |
| Bently Nevada part number | 3500/64M |
Applications
Manufacturer
Bently Nevada
3500/64M Dynamic Pressure Monitor: 4 channels for combustor pressure pulsations in gas turbines
Key specifications
- Channels
- 4 channels in a single slot
- Input
- high-temperature pressure transducers
- Measurements
- band-pass dynamic pressure; configurable corner frequencies and notch filter
- Applications
- combustor pressure pulsations ("humming") in gas turbines
- Bently Nevada part number
- 3500/64M
Official supplier in Kazakhstan
Need advice?
Our specialists will help you choose the optimal 3500/64M Dynamic Pressure Monitor configuration for your equipment.
Related articles
All articles →
10 Equipment Maintenance Strategies That Cut Downtime in 2026
10 maintenance strategies that genuinely reduce downtime in 2026: predictive maintenance, RCM, TPM, and tools like Artesis e-MCM and SDT340, with KPIs you can roll out in stages at plants across Kazakhstan.
Shaft Misalignment: the Hidden Killer of Bearings, Couplings and Seals
Up to half of all rotating equipment failures are linked to shaft misalignment. We break down the types of misalignment, its consequences, and how vibration analysis and current analysis detect it before it destroys couplings and bearings.
What an Hour of Downtime Really Costs and How to Cut Unplanned Stops
Unplanned downtime costs far more than the repair crew's payroll line suggests. We break down the full cost-of-downtime formula and show how switching to predictive maintenance cuts unplanned stops by 30–50%.
4 Stages of Bearing Failure: How to Catch a Defect Months Before It Fails
A bearing doesn't fail instantly — it goes through 4 stages of degradation, and the first one is only visible to ultrasound. We break down the P-F curve and which diagnostic method works at each stage of bearing failure.
The Mysterious 0.6× Frequency — a Frequency That Shouldn't Exist (But Does)
A peak at 0.6× in the spectrum isn't always BPFO. A thought experiment on changing reference frames, and how to confirm the hypothesis with SDT340 ultrasound and Artesis electrical signatures.
Gearbox Diagnostics: Tooth Wear, Pitting and Misalignment Before Shutdown
How to catch gear tooth wear, pitting and misalignment before an emergency stop. SDT 340 ultrasound walkdowns plus Artesis e-MCM on the drive motor — field experience from mining and metallurgy in Kazakhstan.