KEG TRK — Поставка промышленных решений в Казахстане

Compressed air leak cost calculator

Estimate annual air loss, electricity use and cost from measured leak flow and compressor station data.

Enter your own data. Flow and specific energy must use the same gas volume reference conditions. Hours: 0 to 8760.

Enter four non-negative values; annual hours must not exceed 8760.

Calculation: flow × hours = volume; volume × specific energy = energy; energy × tariff = cost.

Project payback

Enter the full project cost and the expected share of calculated benefits you can actually realize. Zero percentages are starting assumptions, not recommendations.

Non-negative value

Non-negative value

From 0 to 100

From 1 to 20

Complete the source calculation and payback fields. Use non-negative numbers within the shown limits; the period must be an integer from 1 to 20 years.

Savings = potential benefit × realizable share. Net benefit = savings − recurring costs. ROI = (net benefit × years − investment) / investment × 100%. Payback = investment / annual net benefit × 12.

Constant annual benefit from year one. Excludes discounting, taxes, inflation and residual value. Benefits are estimates: verify assumptions through a survey and before/after measurements. Zero investment leaves ROI and payback undefined.

Interpreting the result

This estimates energy cost attributable to lost air, not guaranteed savings after repair. It does not convert dB into flow. Actual savings depend on compressor operation and control; compare before and after repair under comparable loads.

Leak inspection route and repair verification