Route-Based Motor Diagnostics with Artesis AMT Pro: 50 Machines per Shift

Not every motor needs online monitoring — but none should be blind. Artesis AMT Pro: 7 minutes per test, no machine sensors, up to 50 tests/day per technician.

vs vibration route vs e-MCM

	Vibration route	AMT Pro	e-MCM
Time/point	30–60 min	7 min	Continuous
Electrical faults	No	Yes	Yes
Points/day	5–10	40–50	All wired assets

Rule: critical → e-MCM; fleet → AMT Pro calendar; borderline → retest or upgrade.

Route priority

High: non-redundant pumps/fans, single-drive conveyors, repeat offenders.
Medium: redundant pumps (alternate tests), large HVAC.
Low: small <15 kW spares.

Test procedure

Clamp CTs + voltage leads → enter motor data → run → A/B/C/D report with fault list. Sync to Artesis IoT over Wi-Fi.

Frequency

Class	Interval
No spare, >1M ₸/h downtime	Monthly
With spare	Quarterly
Auxiliary	Twice/year

First 2–3 cycles build baseline — avoid knee-jerk repairs on first yellow flag.

Typical programme evolution

Year 1: AMT Pro whole fleet → find chronic assets.
Year 2: e-MCM on top 5–10.
Year 3: IoT + CMMS integration.

→ Three-tier PdM strategy · Industry map · Motor monitoring intro

KEG TRK — on-site AMT Pro demo. Contact