Supply in Kazakhstan
KEG TRK supplies motor condition monitoring solutions (Artesis) across Kazakhstan: Almaty, Astana, Karaganda, Ust-Kamenogorsk, Aktobe and other regions. Official warranty, monitoring system design, installation, commissioning and personnel training.
Mining equipment
Key features
Applications and resources
Industry solutions, landing pages and articles on Artesis AMT Pro — Portable Electric Motor Tester
Where it is used
Typical tasks
- Route-based periodic monitoring
- New equipment acceptance
- Troubleshooting
- Baseline measurements
- Pre-repair diagnostics
Description
Artesis AMT Pro is an innovative portable electric motor tester that completes a full diagnostic in just 7 minutes. It uses advanced electrical signature analysis and machine learning to detect faults without installing any external sensors on the machine.
Key features
Fast testing
- 7 minutes — complete motor test cycle
- Automatic report — ready immediately after measurement
- Up to 40–50 machines per day — high route productivity
- Live testing — real-time observation during run-up
Sensorless technology
- Electrical connection only — via motor terminal box
- No vibration sensors — no mechanical mounting
- Quick setup — connected in minutes
- Ideal for hard-to-reach assets
Intelligent diagnostics
Mechanical faults detected
- Rotor imbalance
- Misalignment
- Bearing wear (roller / ball)
- Mechanical looseness
- Driven-equipment issues (pumps, fans)
Electrical faults detected
- Loose stator windings
- Winding short circuits
- Rotor bar defects
- Phase asymmetry
- Harmonic distortion
Technical specifications
Measurement capability
| Parameter | Value |
|---|---|
| Inputs | 3-phase voltage + 3-phase current |
| Sampling rate | 2500 Hz |
| Test time | 7 minutes |
| Motor types | AC 3-phase (all sizes and ratings) |
| Speed control | DOL, star-delta, soft start, VFD |
Connection
| Parameter | Value |
|---|---|
| Voltage | up to 690 V AC (3-phase) |
| Current | up to 1000 A (with CTs) |
| Supply frequency | 50/60 Hz |
| Accuracy | ±1% typical |
Portability
| Parameter | Value |
|---|---|
| Type | Portable, battery-powered |
| Battery life | 8+ hours |
| Display | Colour TFT touchscreen |
| Weight | Approx. 2 kg |
Communications
- Wi-Fi — cloud sync and updates
- USB — data transfer and charging
- Bluetooth — optional
Applications
Route monitoring
- Monthly / quarterly checks
- Condition-based maintenance
- Trend analysis across the fleet
- One instrument for many assets
Equipment acceptance
- Factory acceptance of new motors
- Post-installation verification
- Post-repair quality control
- Baseline reference measurements
Troubleshooting
- Rapid diagnosis when problems appear
- Root-cause analysis
- Before/after repair comparison
- Emergency response surveys
Industries
| Industry | Typical assets |
|---|---|
| Mining | Crushers, mills, conveyors |
| Manufacturing | Main drives, fans, pumps |
| Utilities | Water pumps, HVAC |
| Oil & gas | Pumps, compressors |
| Food | Conveyors, mixers |
Software
Automatic reports
After each test AMT Pro generates:
- Overall health score — A / B / C / D
- Fault list — with severity
- Recommendations — next actions
- Trend data — vs previous tests
- Power data — load and efficiency
Artesis Cloud
- Store all route results centrally
- Browser access from anywhere
- Multi-site fleet view
- Export to PDF, Excel, CSV
Test procedure
Connection (2–3 minutes)
- Attach current clamps (3 phases)
- Connect voltage leads
- Enter motor data (power, speed)
- Start test
Measurement (7 minutes)
- Motor run-up under no-load and load
- Automatic data capture
- AI analysis in real time
- Comparison with digital twin model
Results (instant)
- Overall score A (excellent) to D (critical)
- Fault list with severity
- Actionable recommendations
Advantages vs vibration route
| Feature | Vibration route | AMT Pro |
|---|---|---|
| Test time | 30–60 min | 7 min |
| Installation | Sensors on machine | Clamps only |
| Electrical faults | No | Yes |
| Power / efficiency | No | Yes |
| Machines per day | 5–10 | 40–50 |
ROI
- High daily throughput
- Typical payback 6–12 months
- Fewer specialists required
- Lower maintenance cost through early fault detection
Package contents
Standard kit
- AMT Pro instrument
- Current clamps (3 pcs, multiple ranges)
- Voltage measurement leads
- Charger
- Transit case
- Base software licence
Options
- Additional clamp sets
- Protective case
- Extended cloud subscription
- Operator training
- Calibration certificate
Technical specifications
| type | Portable tester |
| testTime | 7 minutes |
| sampling | 2500 Hz |
| inputs | 3-phase voltage and current |
| battery | Li-Ion, 8+ hours |
| display | TFT touchscreen |
| connectivity | Wi-Fi, USB |
| weight | Approx. 2 kg |
Applications
Manufacturer
Artesis
Portable sensorless motor diagnostics with AI analysis — full test in 7 minutes
Key specifications
- type
- Portable tester
- testTime
- 7 minutes
- sampling
- 2500 Hz
- inputs
- 3-phase voltage and current
- battery
- Li-Ion, 8+ hours
Official supplier in Kazakhstan
Related products
Need advice?
Our specialists will help you choose the optimal Artesis AMT Pro — Portable Electric Motor Tester configuration for your equipment.
Related articles
All articles →
Why Artesis Omnisight Is a Revolutionary Solution for Predictive Maintenance
Most condition monitoring programs split assets into "critical" and "everything else" with incompatible tools and no shared data model. Artesis Omnisight collapses that split at the signal level — here is how and why it works.
5 typical motor faults: how ESA finds them in 7 minutes
Unbalance, bearings, looseness, winding and rotor faults — how Artesis AMT Pro and e-MCM detect each of the five from the current signature, with no sensors on the machine.
ESA, MCSA and vibration analysis: what to choose for CHP auxiliary equipment
A comparison of three predictive diagnostic methods for power block pumps, fans and conveyors: when Artesis ESA is enough, when you need Bently Nevada vibration, and how MCSA differs from full ESA.
Rolling mill monitoring: ESA for auxiliary and main drive motors
At Kazakhstan's rolling mills vibration covers the large stands, but the fleet of roller-table, coiler and cooling-pump motors is often left without predictive monitoring. How Artesis e-MCM and AMT Pro complement vibration.
Pump cavitation: how ESA and ultrasound complement each other
SDT ultrasound hears bubbles collapsing on the pump casing; Artesis ESA sees the efficiency drop and the load anomaly in the current. A combined method for CHP plants, water utilities and mines — without nuisance shutdowns.
Conveyor belt drives: SDT ultrasound and Artesis ESA on one site
Belt tension, sheave wear, pulley unbalance and drive motor bearings — how to combine the SDT340 ultrasound route with Artesis monitoring on belt conveyors at mines and processing plants.