Supply in Kazakhstan
KEG TRK supplies vibration monitoring and analysis solutions (Bently Nevada) across Kazakhstan: Almaty, Astana, Karaganda, Ust-Kamenogorsk, Aktobe and other regions. Official warranty, monitoring system design, installation, commissioning and personnel training.
Mining equipment
Key features
Applications and resources
Industry solutions, landing pages and articles about 330104-00 — 3300 XL proximity component
Where it is used
Typical tasks
- Extended measurement clearance
- Hazardous areas (HA)
- Large machines with high shaft movement
Integrated monitoring: ultrasonic diagnostics · motor monitoring · implementation services
Documentation
Official Baker Hughes / Bently Nevada manufacturer PDFs. Key specifications are also published on this page for search and equipment selection.
Description
Bently Nevada 330104-00 — an 11 mm proximity probe for cases where the 8 mm system does not provide the required linear range or hazardous-area approvals are needed.
Pairs with the 330180-91-xx proximitor and the corresponding 330130-series extension cable.
Key features
- 11 mm tip
- Linear range 4.0 mm (160 mil)
- 3.94 V/mm with 11 mm proximitor
- Hazardous area certification
- API 670
Applications
- Extended measurement clearance
- Hazardous areas (HA)
- Large machines with high shaft movement
Supply in Kazakhstan
KEG TRK supplies, commissions and supports 330104-00 with System 1 integration across Kazakhstan.
Technical specifications
| tipSize | 11 mm |
| linearRange | 4.0 mm (160 mil) |
| sensitivity | 3.94 V/mm (100 mV/mil) |
| Bently Nevada part number | 330104-00 |
Applications
Manufacturer
Bently Nevada
11 mm proximity probe — 4.0 mm range, hazardous area applications
Key specifications
- tipSize
- 11 mm
- linearRange
- 4.0 mm (160 mil)
- sensitivity
- 3.94 V/mm (100 mV/mil)
- Bently Nevada part number
- 330104-00
Official supplier in Kazakhstan
Related products
330103-00 — 3300 XL proximity component
Standard 8 mm 3300 XL proximity probe — 2.0 mm range, API 670 compliant
Bently Nevada
330180-90-00 — Proximitor Sensor 8 mm (3300 XL)
Proximitor transducer 8 mm — 7.87 V/mm, DIN-rail and panel mount
Bently Nevada
3300 XL Series — Eddy-Current Proximity Transducer System
3300 XL eddy-current proximity probes for radial vibration, axial position and gap
Bently Nevada
Need advice?
Our specialists will help you choose the optimal 330104-00 — 3300 XL proximity component configuration for your equipment.
Related articles
All articles →
10 Equipment Maintenance Strategies That Cut Downtime in 2026
10 maintenance strategies that genuinely reduce downtime in 2026: predictive maintenance, RCM, TPM, and tools like Artesis e-MCM and SDT340, with KPIs you can roll out in stages at plants across Kazakhstan.
Shaft Misalignment: the Hidden Killer of Bearings, Couplings and Seals
Up to half of all rotating equipment failures are linked to shaft misalignment. We break down the types of misalignment, its consequences, and how vibration analysis and current analysis detect it before it destroys couplings and bearings.
What an Hour of Downtime Really Costs and How to Cut Unplanned Stops
Unplanned downtime costs far more than the repair crew's payroll line suggests. We break down the full cost-of-downtime formula and show how switching to predictive maintenance cuts unplanned stops by 30–50%.
4 Stages of Bearing Failure: How to Catch a Defect Months Before It Fails
A bearing doesn't fail instantly — it goes through 4 stages of degradation, and the first one is only visible to ultrasound. We break down the P-F curve and which diagnostic method works at each stage of bearing failure.
Gearbox Diagnostics: Tooth Wear, Pitting and Misalignment Before Shutdown
How to catch gear tooth wear, pitting and misalignment before an emergency stop. SDT 340 ultrasound walkdowns plus Artesis e-MCM on the drive motor — field experience from mining and metallurgy in Kazakhstan.
How to Read an FFT Spectrum: Five Vibration Signatures Every Mechanic Should Know
We break down five key vibration signatures in FFT analysis: imbalance, misalignment, mechanical looseness, bearing faults. Learn what the FFT spectrum shows for each rotating-equipment fault — and why FFT alone isn't enough today.