Supply in Kazakhstan
KEG TRK supplies vibration monitoring and analysis solutions (Bently Nevada) across Kazakhstan: Almaty, Astana, Karaganda, Ust-Kamenogorsk, Aktobe and other regions. Official warranty, monitoring system design, installation, commissioning and personnel training.
Mining equipment
Key features
Applications and resources
Industry solutions, landing pages and articles about 3300 XL Series — Eddy-Current Proximity Transducer System
Where it is used
Typical tasks
- Radial shaft vibration
- Axial (thrust) position
- Differential expansion
- Eccentricity
- Keyphasor (phase reference)
Integrated monitoring: ultrasonic diagnostics · motor monitoring · implementation services
Description
The Bently Nevada 3300 XL Series is the current generation of eddy-current proximity transducers, using eddy-current technology for non-contact measurement of vibration, position and other parameters on rotating equipment. The system covers 8mm, 11mm, 25mm and 50mm probe sizes with fully interchangeable, calibration-free components and API 670 (4th Edition) compliance.
Key features
- API 670 (4th Edition) compliance
- Full component interchangeability
- No calibration required
- RFI/EMI immunity
- Multiple sizes: 8mm, 11mm, 25mm, 50mm
Applications
- Radial shaft vibration
- Axial (thrust) position
- Differential expansion
- Eccentricity
- Keyphasor (phase reference)
Supply in Kazakhstan
KEG TRK supplies, commissions and supports 3300 XL Series with System 1 integration across Kazakhstan.
Technical specifications
| Sizes | 8mm, 11mm, 25mm, 50mm |
| Range 8 mm | 2.0 mm (80 mil) linear range |
| Range 11 mm | 4.0 mm (160 mil) linear range |
| Range 25 mm | 12.7 mm (500 mil) for differential expansion |
| Sensitivity 8 mm | 7.87 V/mm (200 mV/mil) |
| Sensitivity 11 mm | 3.94 V/mm (100 mV/mil) |
| Bently Nevada part number | 3300 XL Series |
Applications
Manufacturer
Bently Nevada
3300 XL eddy-current proximity probes for radial vibration, axial position and gap
Key specifications
- Sizes
- 8mm, 11mm, 25mm, 50mm
- Range 8 mm
- 2.0 mm (80 mil) linear range
- Range 11 mm
- 4.0 mm (160 mil) linear range
- Range 25 mm
- 12.7 mm (500 mil) for differential expansion
- Sensitivity 8 mm
- 7.87 V/mm (200 mV/mil)
Official supplier in Kazakhstan
Related products
330103-00 — 3300 XL proximity component
Standard 8 mm 3300 XL proximity probe — 2.0 mm range, API 670 compliant
- 8 mm
- 2.0 mm (80 mil)
330130-045-00 — 3300 XL proximity component
8 mm extension cable for the 3300 XL system — interchangeable with 330103 and 330180 without calibration
- 8 mm 3300 XL
- 330130-045-00 (4.5 m)
330180-90-00 — Proximitor Sensor 8 mm (3300 XL)
Proximitor transducer 8 mm — 7.87 V/mm, DIN-rail and panel mount
- 3300 XL 8 mm system
- 7.87 V/mm (200 mV/mil)
330193-00 — 3300 XL proximity component
High-temperature 3300 XL proximity probe rated to +350°C for turbines and hot zones
- up to +350°C
- HTPS (High-Temperature Proximity System)
330903-00 — 3300 XL proximity component
Narrow Side View probe 3300 XL — narrow-profile tip for confined spaces near bearings
- NSv (Narrow Side View)
- 3300 XL 8 mm
330025-00 — 3300 XL 25 mm Probe (Differential Expansion)
25 mm probe for differential expansion (DE) — SAG mills and turbines
- 25 mm
- 12.7 mm (500 mil)
3500/42M Proximitor/Seismic Monitor
3500/42M Proximitor/Seismic Monitor: 4 channels for proximity and seismic sensors, vibration and position, 4–20 mA outputs
- 4 channels, programmed in pairs
- proximity and seismic transducers (accelerometers, velocity sensors)
Orbit 60 Series — Next-Generation Monitoring System
Next-generation machinery protection platform with advanced cybersecurity and high channel density
- 80-88 dynamic channels
- 100x higher processing power
Need advice?
Our specialists will help you choose the optimal 3300 XL Series — Eddy-Current Proximity Transducer System configuration for your equipment.
Related articles
All articles →
Fan and Induced Draft Fan Monitoring in Metallurgical Shops — Bently Nevada
Fans and ID fans in blast furnace, steelmaking and rolling production: 3300 XL proximity, Velomitor, Orbit DCM and 3500. Typical faults, measurement points and protection from sudden failure.
3300 XL Eddy Current Probes on Large Fans — Bently Nevada
When a casing sensor is not enough: radial and axial shaft monitoring on large fans and ID fans with 3300 XL, Proximitor and 3500. Installation, calibration and gap interpretation.
Bently Nevada on Mine Water Supply and Cooling Pumps — Vibration Monitoring
Pump stations at mining concentrators: tailings water, mill cooling, concentrator circuits. Orbit DCM, 2300, Velomitor — vibration control without replacing the entire fleet with electrical monitoring.
Orbit DCM on Conveyors and Crushing-Grinding Circuits — Bently Nevada
Continuous vibration monitoring of belt conveyor drives, crushers and mills at mining sites. Orbit DCM, System 1 and route-based SCOUT — when to install stationary monitoring on mining equipment.
SCOUT Route-Based Vibration Collection at Concentrators — Bently Nevada
How to build route vibration monitoring at a concentrator: SCOUT Portable, Ranger Pro, Trendmaster, databases, survey intervals and linkage to permanent Orbit DCM monitoring.
10 Equipment Maintenance Strategies That Cut Downtime in 2026
10 maintenance strategies that genuinely reduce downtime in 2026: predictive maintenance, RCM, TPM, and tools like Artesis e-MCM and SDT340, with KPIs you can roll out in stages at plants across Kazakhstan.