Поставка в Казахстане
KEG TRK поставляет решения для вибромониторинга и вибродиагностики (Bently Nevada) по всему Казахстану: Алматы, Астана, Караганда, Усть-Каменогорск, Актобе и другие регионы. Официальная гарантия, проектирование систем мониторинга, монтаж, пусконаладка и обучение персонала. Ниже — технические характеристики и описание; для подбора конфигурации и коммерческого предложения оставьте заявку.
Горное оборудование
Key features
Applications and resources
Industry solutions, landing pages and articles about 330180-90-00 — Proximitor Sensor 8 mm (3300 XL)
Where it is used
Typical tasks
- Monitors 3500/40M, 3500/42M
- Orbit 60 input modules
- Laboratory and permanent-installation diagnostics
Integrated monitoring: ultrasonic diagnostics · motor monitoring · implementation services
Documentation
Official Baker Hughes / Bently Nevada manufacturer PDFs. Key specifications are also published on this page for search and equipment selection.
Description
330180-90-00 — proximitor sensor for the 8 mm 3300 XL system. It converts the eddy-current probe signal into a voltage output for Bently Nevada monitoring modules.
Mounting
- DIN-rail — high-density panel mounting
- Panel mount — local HMI near the machine
Related part numbers
- 330180-91-00 / 330180-91-05 — 11 mm versions
- 144181-50 — universal 5/8 mm proximitor
Technical specifications
| pairing | 3300 XL 8 mm system |
| sensitivity | 7.87 V/mm (200 mV/mil) |
| mounting | DIN-rail, 4-hole panel |
| output | −8 VDC per gap, buffered |
| Bently Nevada part number | 330180-90-00 |
Applications
Manufacturer
Bently Nevada
Proximitor transducer 8 mm — 7.87 V/mm, DIN-rail and panel mount
Key specifications
- pairing
- 3300 XL 8 mm system
- sensitivity
- 7.87 V/mm (200 mV/mil)
- mounting
- DIN-rail, 4-hole panel
- output
- −8 VDC per gap, buffered
- Bently Nevada part number
- 330180-90-00
Official supplier in Kazakhstan
Related products
330103-00 — 3300 XL 8 mm Proximity Probe
Стандартный 8 mm proximity probe Bently Nevada — 2.0 mm диапазон, API 670
Bently Nevada
3300 XL Proximity Transducer System - Вихретоковые датчики
Вихретоковые датчики приближения для измерения радиальной вибрации, осевого положения и других парам...
Bently Nevada
3500/40M Proximitor Monitor - Монитор вихретоковых датчиков
Модуль мониторинга для 4 каналов вихретоковых датчиков приближения (Proximitor)
Bently Nevada
Нужна консультация?
Наши специалисты помогут подобрать оптимальную конфигурацию 330180-90-00 — Proximitor Sensor 8 mm (3300 XL) для вашего оборудования.
Related articles
All articles →
10 Maintenance Strategies That Cut Downtime in 2026
Predictive, preventive, RCM and TPM — ten strategies that work on Kazakh mining and energy sites. Tools: Artesis e-MCM, SDT ultrasound routes and condition KPIs your team can adopt in phases.
Shaft Misalignment: The Hidden Killer of Bearings and Seals
Misalignment shows up as 2× vibration — but often after seals and couplings are already damaged. Alignment checks plus Artesis e-MCM and SDT ultrasound catch the thermal and friction clues earlier.
The True Cost of Unplanned Downtime — and How to Cut It 30–50%
Downtime costs far more than repair wages. Full cost formula for Kazakhstan industry — and how predictive ultrasound, electrical monitoring and vibration together reduce emergency stops.
Four Stages of Bearing Failure and the P-F Curve
Bearings do not fail overnight — they pass four degradation stages. Stage 1 is audible only to ultrasound; stage 4 is catastrophic. Which method works at each stage.
Gearbox Diagnostics: Tooth Wear, Pitting and Misalignment Before Shutdown
How to catch gear tooth wear, pitting and misalignment before an emergency stop. SDT 340 ultrasound walkdowns plus Artesis e-MCM on the drive motor — field experience from mining and metallurgy in Kazakhstan.
How to Read an FFT Spectrum: Bearing and Gear Signatures Explained
BPFO, BPFI, GMF and sidebands — a practical guide to reading vibration FFT plots for maintenance engineers. When spectra lie, Artesis electrical signatures add a second opinion from the motor cable.