Fan and Induced Draft Fan Monitoring in Metallurgical Shops | Bently Nevada — KEG TRK
Fans and ID fans in blast furnace, steelmaking and rolling production: 3300 XL proximity, Velomitor, Orbit DCM and 3500. Typical faults, measurement points and protection from sudden failure.
⚠️ EN version — draft. Ready to publish once kk/en routing (i18n) is implemented across the site.
Fans and induced-draft fans in metallurgical shops are among the most heavily loaded rotating machines on site. They move hot, abrasive gas, run with bearing temperatures up to 90–110 °C and are often the only path for combustion products. An ID fan trip on a blast furnace or converter gas cleaning line is not a local issue — it risks shutting down the entire process stage.
Equipment in this article
3300 XL Proximity Transducer System - Вихретоковые датчики
Вихретоковые датчики приближения для измерения радиальной вибрации, осевого поло...
Velomitor - Датчики скорости вибрации
Пьезоэлектрические датчики скорости вибрации для мониторинга корпусов машин и по...
Orbit DCM - Распределенная система мониторинга
Распределённый мониторинг для горнодобычи, конвейеров и мобильной техники — 16 д...
Read also
6/26/2026
Vibration Monitoring of Rolling Mill Auxiliary Drives | Bently Nevada — KEG TRK
How to protect auxiliary rolling mill drives — roll tables, shears, coilers, lube pumps — with Bently Nevada 3500/42M and Orbit DCM. Measurement points, typical faults and downtime economics in metallurgy.
6/26/2026
3300 XL Eddy Current Probes on Large Fans | Bently Nevada — KEG TRK
When a casing sensor is not enough: radial and axial shaft monitoring on large fans and ID fans with 3300 XL, Proximitor and 3500. Installation, calibration and gap interpretation.
6/26/2026
Predictive Maintenance of Metallurgy Gearboxes: Spectral Analysis | Bently Nevada — KEG TRK
Tooth wear, pitting and misalignment in rolling mill and metallurgical conveyor gearboxes — how Bently Nevada spectral analysis and System 1 detect faults weeks before failure.