Supply in Kazakhstan
KEG TRK supplies equipment diagnostics solutions (KEG TRK) across Kazakhstan: Almaty, Astana, Karaganda, Ust-Kamenogorsk, Aktobe and other regions. Official warranty, monitoring system design, installation, commissioning and personnel training.
Key features
Applications and resources
Industry solutions, landing pages and articles on Online oil particle monitor
Where it is used
Typical tasks
- Main belt conveyor drives
- Ball and SAG mill gearboxes
- Pump stations without spare unit
- Compressor and turbine auxiliaries
- Complement to lab tribology
Description
Online oil particle monitor — tribology equipment for lubricant and hydraulic fluid analysis on gearboxes, hydraulics and pump drives. Supplied and commissioned by KEG TRK in Kazakhstan.
Key features
- Install in lube line bypass
- Trend and alarm setpoints
- 4–20 mA / Modbus output
- DCS / SCADA compatible
- Class A no-spare assets
Applications
- Main belt conveyor drives
- Ball and SAG mill gearboxes
- Pump stations without spare unit
- Compressor and turbine auxiliaries
- Complement to lab tribology
Technical specifications
| Parameter | Value |
|---|---|
| Installation | Lube line bypass |
| Standard | ISO 4406 |
| Outputs | 4–20 mA, Modbus RTU/TCP |
| Power supply | 24 V DC / 220 V AC |
| Media | Oil, hydraulic fluid |
Integrated tribology diagnostics
Laboratory oil analysis complements vibration monitoring, laser alignment and thermal imaging on auxiliary equipment at mining, metals and power plants. For transformer oil and DGA, see Rapidox.
KEG TRK helps launch a tribology programme: instrument selection, sampling procedures, training and trend interpretation.
Technical specifications
| Installation | Lube line bypass |
| Standard | ISO 4406 |
| Outputs | 4–20 mA, Modbus RTU/TCP |
| Power supply | 24 V DC / 220 V AC |
| Media | Oil, hydraulic fluid |
Applications
Manufacturer
KEG TRK
Continuous in-line particle monitoring for critical no-spare gearboxes — real-time ISO 4406 trending
Key specifications
- Installation
- Lube line bypass
- Standard
- ISO 4406
- Outputs
- 4–20 mA, Modbus RTU/TCP
- Power supply
- 24 V DC / 220 V AC
- Media
- Oil, hydraulic fluid
Official supplier in Kazakhstan
Related products
Portable particle counter ISO 4406
Laser particle counter for lubricant and hydraulic oil cleanliness per ISO 4406 / NAS 1638 in the field
- ISO 4406, NAS 1638, SAE AS4059
- 4 µm – 100 µm (typical)
Field oil analysis laboratory
Instrument kit for mine, metals and power tribology: particles, wear, viscosity and water in one route
- Per customer specification
- Particles + spectrometry + viscosity + water
Need advice?
Our specialists will help you choose the optimal Online oil particle monitor configuration for your equipment.
Related articles
All articles →
Laboratory Oil Analysis for Gearboxes and Hydraulics at Mines and Steel Plants
Tribology for auxiliary gearboxes, hydraulic systems and bearing lube: wear particles, water, viscosity and sampling intervals at mining and metallurgical sites.
Four Predictive Maintenance Methods for Auxiliary Equipment: Alignment, Balancing, Oil, Thermography
How to combine laser alignment, field balancing, oil analysis and IR thermography on pumps, fans and conveyors at steel, mining and power sites without duplicate spend.
Predictive Maintenance of Metallurgy Gearboxes: Spectral Analysis — Bently Nevada
Tooth wear, pitting and misalignment in rolling mill and metallurgical conveyor gearboxes — how Bently Nevada spectral analysis and System 1 detect faults weeks before failure.
Gearbox Diagnostics: Tooth Wear, Pitting and Misalignment Before Shutdown
How to catch gear tooth wear, pitting and misalignment before an emergency stop. SDT 340 ultrasound walkdowns plus Artesis e-MCM on the drive motor — field experience from mining and metallurgy in Kazakhstan.