Supply in Kazakhstan
KEG TRK supplies equipment diagnostics solutions (KEG TRK) across Kazakhstan: Almaty, Astana, Karaganda, Ust-Kamenogorsk, Aktobe and other regions. Official warranty, monitoring system design, installation, commissioning and personnel training.
Key features
Applications and resources
Industry solutions, landing pages and articles on Portable particle counter ISO 4406
Where it is used
Typical tasks
- Belt conveyor gearboxes
- Excavator and mill hydraulics
- Power plant pump lube systems
- Post-overhaul commissioning
- Verification after oil and filter change
Description
Portable particle counter ISO 4406 — tribology equipment for lubricant and hydraulic fluid analysis on gearboxes, hydraulics and pump drives. Supplied and commissioned by KEG TRK in Kazakhstan.
Key features
- ISO 4406 and NAS 1638 reporting
- 5–100 ml sample volume
- Result in 2–5 minutes
- Trend memory and report export
- Battery power for route-based checks
Applications
- Belt conveyor gearboxes
- Excavator and mill hydraulics
- Power plant pump lube systems
- Post-overhaul commissioning
- Verification after oil and filter change
Technical specifications
| Parameter | Value |
|---|---|
| Standard | ISO 4406, NAS 1638, SAE AS4059 |
| Particle range | 4 µm – 100 µm (typical) |
| Analysis time | 2–5 min |
| Memory | ≥ 1000 readings |
| Interface | USB, Bluetooth (option) |
Integrated tribology diagnostics
Laboratory oil analysis complements vibration monitoring, laser alignment and thermal imaging on auxiliary equipment at mining, metals and power plants. For transformer oil and DGA, see Rapidox.
KEG TRK helps launch a tribology programme: instrument selection, sampling procedures, training and trend interpretation.
Technical specifications
| Standard | ISO 4406, NAS 1638, SAE AS4059 |
| Particle range | 4 µm – 100 µm (typical) |
| Analysis time | 2–5 min |
| Memory | ≥ 1000 readings |
| Interface | USB, Bluetooth (option) |
Applications
Manufacturer
KEG TRK
Laser particle counter for lubricant and hydraulic oil cleanliness per ISO 4406 / NAS 1638 in the field
Key specifications
- Standard
- ISO 4406, NAS 1638, SAE AS4059
- Particle range
- 4 µm – 100 µm (typical)
- Analysis time
- 2–5 min
- Memory
- ≥ 1000 readings
- Interface
- USB, Bluetooth (option)
Official supplier in Kazakhstan
Related products
Need advice?
Our specialists will help you choose the optimal Portable particle counter ISO 4406 configuration for your equipment.
Related articles
All articles →Laboratory Oil Analysis for Gearboxes and Hydraulics at Mines and Steel Plants | KEG TRK
Tribology for auxiliary gearboxes, hydraulic systems and bearing lube: wear particles, water, viscosity and sampling intervals at mining and metallurgical sites.
Four Predictive Maintenance Methods for Auxiliary Equipment: Alignment, Balancing, Oil, Thermography | KEG TRK
How to combine laser alignment, field balancing, oil analysis and IR thermography on pumps, fans and conveyors at steel, mining and power sites without duplicate spend.
Predictive Maintenance of Metallurgy Gearboxes: Spectral Analysis | Bently Nevada — KEG TRK
Tooth wear, pitting and misalignment in rolling mill and metallurgical conveyor gearboxes — how Bently Nevada spectral analysis and System 1 detect faults weeks before failure.
Gearbox Diagnostics: Tooth Wear, Pitting and Misalignment Before Shutdown
How to catch gear tooth wear, pitting and misalignment before an emergency stop. SDT 340 ultrasound walkdowns plus Artesis e-MCM on the drive motor — field experience from mining and metallurgy in Kazakhstan.