Supply in Kazakhstan
KEG TRK supplies equipment diagnostics solutions (KEG TRK) across Kazakhstan: Almaty, Astana, Karaganda, Ust-Kamenogorsk, Aktobe and other regions. Official warranty, monitoring system design, installation, commissioning and personnel training.
Key features
Applications and resources
Industry solutions, landing pages and articles on Oil viscosity analyzer
Where it is used
Typical tasks
- Gearboxes and hydraulics
- Turbine and compressor oils
- After top-up with different grade
- Thermal ageing assessment
- Incoming oil acceptance
Description
Oil viscosity analyzer — tribology equipment for lubricant and hydraulic fluid analysis on gearboxes, hydraulics and pump drives. Supplied and commissioned by KEG TRK in Kazakhstan.
Key features
- 40 °C and 100 °C measurement
- Calculated viscosity index (VI)
- Small sample volume
- Compare to oil data sheet
- Portable and bench formats
Applications
- Gearboxes and hydraulics
- Turbine and compressor oils
- After top-up with different grade
- Thermal ageing assessment
- Incoming oil acceptance
Technical specifications
| Parameter | Value |
|---|---|
| Parameter | Kinematic viscosity |
| Temperatures | 40 °C, 100 °C |
| Range | 1–2000 cSt (typical) |
| Accuracy | ±1% (typical) |
| Standard | ASTM D445, ISO 3104 |
Integrated tribology diagnostics
Laboratory oil analysis complements vibration monitoring, laser alignment and thermal imaging on auxiliary equipment at mining, metals and power plants. For transformer oil and DGA, see Rapidox.
KEG TRK helps launch a tribology programme: instrument selection, sampling procedures, training and trend interpretation.
Technical specifications
| Parameter | Kinematic viscosity |
| Temperatures | 40 °C, 100 °C |
| Range | 1–2000 cSt (typical) |
| Accuracy | ±1% (typical) |
| Standard | ASTM D445, ISO 3104 |
Applications
Manufacturer
KEG TRK
Kinematic viscosity at 40 °C and 100 °C to detect oxidation, dilution and oil grade mismatch
Key specifications
- Parameter
- Kinematic viscosity
- Temperatures
- 40 °C, 100 °C
- Range
- 1–2000 cSt (typical)
- Accuracy
- ±1% (typical)
- Standard
- ASTM D445, ISO 3104
Official supplier in Kazakhstan
Related products
Need advice?
Our specialists will help you choose the optimal Oil viscosity analyzer configuration for your equipment.
Related articles
All articles →Laboratory Oil Analysis for Gearboxes and Hydraulics at Mines and Steel Plants | KEG TRK
Tribology for auxiliary gearboxes, hydraulic systems and bearing lube: wear particles, water, viscosity and sampling intervals at mining and metallurgical sites.
Four Predictive Maintenance Methods for Auxiliary Equipment: Alignment, Balancing, Oil, Thermography | KEG TRK
How to combine laser alignment, field balancing, oil analysis and IR thermography on pumps, fans and conveyors at steel, mining and power sites without duplicate spend.
Predictive Maintenance of Metallurgy Gearboxes: Spectral Analysis | Bently Nevada — KEG TRK
Tooth wear, pitting and misalignment in rolling mill and metallurgical conveyor gearboxes — how Bently Nevada spectral analysis and System 1 detect faults weeks before failure.
Gearbox Diagnostics: Tooth Wear, Pitting and Misalignment Before Shutdown
How to catch gear tooth wear, pitting and misalignment before an emergency stop. SDT 340 ultrasound walkdowns plus Artesis e-MCM on the drive motor — field experience from mining and metallurgy in Kazakhstan.