Поставка в Казахстане
KEG TRK поставляет решения для диагностики оборудования (KEG TRK) по всему Казахстану: Алматы, Астана, Караганда, Усть-Каменогорск, Актобе и другие регионы. Официальная гарантия, проектирование систем мониторинга, монтаж, пусконаладка и обучение персонала.
Key features
Applications and resources
Отраслевые решения, лендинги и статьи по Karl Fischer water-in-oil analyzer
Where it is used
Typical tasks
- Excavator and plant hydraulic tanks
- Gearboxes with seal ingress
- Turbine auxiliary lube oil
- Sump condensation diagnostics
- Post-flush system verification
Description
Karl Fischer water-in-oil analyzer — tribology equipment for lubricant and hydraulic fluid analysis on gearboxes, hydraulics and pump drives. Supplied and commissioned by KEG TRK in Kazakhstan.
Key features
- Karl Fischer volumetric / coulometric
- ppm to % range
- Fast measurement cycle
- Automatic calibration
- Portable route configuration
Applications
- Excavator and plant hydraulic tanks
- Gearboxes with seal ingress
- Turbine auxiliary lube oil
- Sump condensation diagnostics
- Post-flush system verification
Technical specifications
| Parameter | Value |
|---|---|
| Method | Karl Fischer |
| Range | 10 ppm – 100% |
| Sample volume | 1–5 ml |
| Time | 1–3 min |
| Standard | ASTM D6304, ISO 8534 |
Integrated tribology diagnostics
Laboratory oil analysis complements vibration monitoring, laser alignment and thermal imaging on auxiliary equipment at mining, metals and power plants. For transformer oil and DGA, see Rapidox.
KEG TRK helps launch a tribology programme: instrument selection, sampling procedures, training and trend interpretation.
Technical specifications
| Method | Karl Fischer |
| Range | 10 ppm – 100% |
| Sample volume | 1–5 ml |
| Time | 1–3 min |
| Standard | ASTM D6304, ISO 8534 |
Applications
Manufacturer
KEG TRK
Titrimetric water content in oil and hydraulic fluids — critical for gearboxes and hydraulics
Key specifications
- Method
- Karl Fischer
- Range
- 10 ppm – 100%
- Sample volume
- 1–5 ml
- Time
- 1–3 min
- Standard
- ASTM D6304, ISO 8534
Official supplier in Kazakhstan
Related products
Нужна консультация?
Наши специалисты помогут подобрать оптимальную конфигурацию Karl Fischer water-in-oil analyzer для вашего оборудования.
Related articles
All articles →Laboratory Oil Analysis for Gearboxes and Hydraulics at Mines and Steel Plants | KEG TRK
Tribology for auxiliary gearboxes, hydraulic systems and bearing lube: wear particles, water, viscosity and sampling intervals at mining and metallurgical sites.
Four Predictive Maintenance Methods for Auxiliary Equipment: Alignment, Balancing, Oil, Thermography | KEG TRK
How to combine laser alignment, field balancing, oil analysis and IR thermography on pumps, fans and conveyors at steel, mining and power sites without duplicate spend.
Predictive Maintenance of Metallurgy Gearboxes: Spectral Analysis | Bently Nevada — KEG TRK
Tooth wear, pitting and misalignment in rolling mill and metallurgical conveyor gearboxes — how Bently Nevada spectral analysis and System 1 detect faults weeks before failure.
Gearbox Diagnostics: Tooth Wear, Pitting and Misalignment Before Shutdown
How to catch gear tooth wear, pitting and misalignment before an emergency stop. SDT 340 ultrasound walkdowns plus Artesis e-MCM on the drive motor — field experience from mining and metallurgy in Kazakhstan.