Supply in Kazakhstan
KEG TRK supplies measurement instrumentation solutions (ELEMER) across Kazakhstan: Almaty, Astana, Karaganda, Ust-Kamenogorsk, Aktobe and other regions. Official warranty, monitoring system design, installation, commissioning and personnel training.
Key features
Applications and resources
Industry solutions, landing pages and articles about KSHM-15 - Ball Valve for Pressure Sensors
Where it is used
Typical tasks
- Oil and gas industry
- Chemical industry
- Power generation
KSHM-15
The KSHM-15 ball valve connects pressure transducers, electrocontact pressure gauges and dial pressure gauges to the measured medium.
Design features
The KSHM series valves allow a zero check of the pressure measuring instrument by connecting the instrument's measuring chamber to atmosphere. Specific design features give the KSHM series operational advantages over similar products from other manufacturers.
Versions
KSHM-15/6.3
Standard version with thread in the valve body.
KSHM-15/6.3-PSh
With a movable fitting for sensor connection (sensor with indication can be installed in the required position).
KSHM-15/6.3-PShK
With a movable fitting and additional pressure tap (sensor with indication installed in the required position, plus connection point for metrological equipment).
Technical specifications
- Nominal diameter DN: 15 mm
- Nominal pressure PN: 6.3 MPa
- Inlet thread: G1/2"
- Outlet thread: M20x1.5 (G1/2" to order)
Technical specifications
| Nominal diameter DN | 15 mm |
| Nominal pressure PN | 6.3 MPa |
| Inlet thread | G1/2" |
| Outlet thread | M20x1.5 (G1/2" to order) |
| Design version | standard, PSh, PShK |
Applications
Certificates and approvals
- ✓TR CU 010/2011
Manufacturer
ELEMER
Single-valve ball valve, DN 15 mm, PN 6.3 MPa
Key specifications
- Nominal diameter DN
- 15 mm
- Nominal pressure PN
- 6.3 MPa
- Inlet thread
- G1/2"
- Outlet thread
- M20x1.5 (G1/2" to order)
- Design version
- standard, PSh, PShK
Official supplier in Kazakhstan
Related products
ELEMER-BK-A - Series A Valve Manifolds
3- and 5-valve manifolds for mounting differential pressure sensors
ELEMER
ELEMER-BK-C - Series C Valve Manifolds
3- and 5-valve manifolds with enhanced characteristics
ELEMER
ELEMER-BK-E - Series E Valve Manifolds
High-pressure 2-, 3-, 5-valve manifolds up to 63 MPa
ELEMER
Need advice?
Our specialists will help you choose the optimal KSHM-15 - Ball Valve for Pressure Sensors configuration for your equipment.