
Supply in Kazakhstan
KEG TRK supplies motor condition monitoring solutions (Artesis) across Kazakhstan: Almaty, Astana, Karaganda, Ust-Kamenogorsk, Aktobe and other regions. Official warranty, monitoring system design, installation, commissioning and personnel training.
Mining equipment
Key features
Applications and resources
Industry solutions, landing pages and articles on Artesis MCM (discontinued)
Where it is used
Typical tasks
- AC electric motors (legacy installed base)
- Pump equipment
- Fans and compressors
- Hard-to-reach and submersible pumps
Status: discontinued
Artesis MCM (Motor Condition Monitor) was the first-generation panel-mount online motor monitoring system that Artesis sold before moving to the current e-MCM line. The product has been discontinued and replaced by Artesis e-MCM — the current model with an expanded fault-signature database, Ethernet/Modbus TCP/OPC UA connectivity, and cloud deployment.
This page is kept for reference for customers who still operate Artesis MCM hardware (a panel-mount unit with LCD display and keypad, marketed as MCM / MCM Line / MCM Inverter) — for specification lookup and for planning a migration to the current replacement.
Description
MCM was a DIN panel-mount unit with its own LCD display, LED indicators and a control keypad. It connected via current and voltage transformers to the motor terminal box, and data was sent over RS422/485 to the MCMSCADA software for collection and trending.
The working principle was already based on self-learning: on first power-up, MCM built a reference model of normal motor behavior (accounting for speed and load), then compared ongoing measurements against that model to determine the type and severity of developing faults.
Technical specifications (archival data)
| Parameter | Value |
|---|---|
| Monitoring type | Online, continuous 24/7 |
| Mounting | Panel mount, 91 × 91 mm |
| Indication | LCD display, 5 LEDs, keypad |
| Inputs | 3-phase voltage and current |
| Communication | RS422/485 (RS232, Ethernet optional) |
| Power supply | 100–240 V AC, 47–64 Hz, 19 VA, or 120–300 V DC |
| Relay output | 1 assignable |
| Protection | IP40 (front panel), IP20 (enclosure) |
| Software | MCMSCADA |
How the current replacement — Artesis e-MCM — differs
| Characteristic | MCM (discontinued) | e-MCM (current model) |
|---|---|---|
| Indication | Local LCD on the unit | Web interface, traffic-light system |
| Communication | RS422/485 | Ethernet, Modbus TCP, OPC UA |
| Deployment | Local panel only | On-premise or cloud |
| Fault signature database | Model built for a single motor | 10M+ fault signatures |
| Pump performance monitoring | No | Yes |
| Energy analytics | No | Yes |
If your site still operates Artesis MCM equipment and you need a replacement, upgrade path, or integration with current Artesis systems, get in touch for guidance on selecting e-MCM.
Technical specifications
| Status | Discontinued |
| Replacement | Artesis e-MCM |
| Monitoring | Online, continuous 24/7 |
| Mounting | Panel mount, 91 × 91 mm |
| Display | LCD display, 5 LEDs, tactile keypad |
| Inputs | 3-phase voltage and current |
| Communication | RS422/485 (RS232 and Ethernet optional) |
| Power supply | 100–240 V AC / 47–64 Hz or 120–300 V DC |
| Protection | IP40 (front panel), IP20 (enclosure) |
| Software | MCMSCADA |
Applications
Manufacturer
Artesis
First-generation Artesis panel-mount online motor condition monitor. Discontinued, replaced by Artesis e-MCM
Key specifications
- Status
- Discontinued
- Replacement
- Artesis e-MCM
- Monitoring
- Online, continuous 24/7
- Mounting
- Panel mount, 91 × 91 mm
- Display
- LCD display, 5 LEDs, tactile keypad
Official supplier in Kazakhstan
Related products

Artesis e-MCM — Online Motor Condition Monitoring
Continuous motor monitoring through current and voltage analysis. Installation, learning, alarm investigation and system selection.
- Online, continuous 24/7
- 3-phase voltage and current

Artesis AMTPro portable motor tester
Assess motors and driven equipment from cabinet current and voltage. Review test conditions, report categories and AMTPro configuration for a site survey.
- Electrical signature analysis
- Three-phase current and voltage

Artesis e-PCM — Generator and Wind Turbine Monitoring
Sensorless monitoring of generators and their prime movers
- Online monitoring
- Generators, wind turbines
Need advice?
Our specialists will help you choose the optimal Artesis MCM (discontinued) configuration for your equipment.
Related articles
All articles →
Artesis Motor Monitoring by Industry: Where ESA Beats Vibration
Mining, metals, power, water and oil & gas — one technology, different assets. A map of Artesis e-MCM, AMT Pro and e-PCM applications with links to sector guides for Kazakhstan industry.

Why Vibration Analysis Alone Isn't Enough: SDT Ultrasound and Artesis Electrical Monitoring
Vibration analysis doesn't see everything. Here's what SDT 340 ultrasound, LUBExpert and Artesis e-MCM online motor monitoring add — and why they're installed alongside vibration, not instead of it.

Artesis e-MCM motor monitoring payback: a worked example
Estimate motor monitoring payback in KZT using project costs, annual operating expenses and different numbers of verified interventions.

Electric Motor Condition Monitoring: What It Is and Why Plants Need It
Motors drive 40–70% of plant energy use. How Artesis e-MCM and AMT Pro monitor the whole fleet from supply cables — without shaft sensors — and cut unplanned downtime in Kazakhstan industry.
