Supply in Kazakhstan
KEG TRK supplies equipment diagnostics solutions (KEG TRK) across Kazakhstan: Almaty, Astana, Karaganda, Ust-Kamenogorsk, Aktobe and other regions. Official warranty, monitoring system design, installation, commissioning and personnel training.
Key features
Applications and resources
Industry solutions, landing pages and articles on Wear debris spectrometer
Where it is used
Typical tasks
- Crusher and mill gearboxes
- Oil-bath bearing assemblies
- Rolling mill hydraulics
- Concentrator pump drives
- Class A tribology programs
Description
Wear debris spectrometer — tribology equipment for lubricant and hydraulic fluid analysis on gearboxes, hydraulics and pump drives. Supplied and commissioned by KEG TRK in Kazakhstan.
Key features
- 20+ elements in one run
- Sample from 2 ml
- PQ index for large ferrous debris (option)
- Asset trend database
- ASTM D5185 aligned
Applications
- Crusher and mill gearboxes
- Oil-bath bearing assemblies
- Rolling mill hydraulics
- Concentrator pump drives
- Class A tribology programs
Technical specifications
| Parameter | Value |
|---|---|
| Method | AES / ICP (per configuration) |
| Elements | Fe, Cu, Al, Cr, Pb, Sn, Si and others |
| Sample volume | 2–10 ml |
| Cycle time | 30–90 s |
| Standard | ASTM D5185, ISO 4407 |
Integrated tribology diagnostics
Laboratory oil analysis complements vibration monitoring, laser alignment and thermal imaging on auxiliary equipment at mining, metals and power plants. For transformer oil and DGA, see Rapidox.
KEG TRK helps launch a tribology programme: instrument selection, sampling procedures, training and trend interpretation.
Technical specifications
| Method | AES / ICP (per configuration) |
| Elements | Fe, Cu, Al, Cr, Pb, Sn, Si and others |
| Sample volume | 2–10 ml |
| Cycle time | 30–90 s |
| Standard | ASTM D5185, ISO 4407 |
Applications
Manufacturer
KEG TRK
Atomic emission or ICP spectrometer for quantitative Fe, Cu, Al, Cr and other wear metals in oil
Key specifications
- Method
- AES / ICP (per configuration)
- Elements
- Fe, Cu, Al, Cr, Pb, Sn, Si and others
- Sample volume
- 2–10 ml
- Cycle time
- 30–90 s
- Standard
- ASTM D5185, ISO 4407
Official supplier in Kazakhstan
Related products
Need advice?
Our specialists will help you choose the optimal Wear debris spectrometer configuration for your equipment.
Related articles
All articles →Laboratory Oil Analysis for Gearboxes and Hydraulics at Mines and Steel Plants | KEG TRK
Tribology for auxiliary gearboxes, hydraulic systems and bearing lube: wear particles, water, viscosity and sampling intervals at mining and metallurgical sites.
Predictive Maintenance of Metallurgy Gearboxes: Spectral Analysis | Bently Nevada — KEG TRK
Tooth wear, pitting and misalignment in rolling mill and metallurgical conveyor gearboxes — how Bently Nevada spectral analysis and System 1 detect faults weeks before failure.
Four Predictive Maintenance Methods for Auxiliary Equipment: Alignment, Balancing, Oil, Thermography | KEG TRK
How to combine laser alignment, field balancing, oil analysis and IR thermography on pumps, fans and conveyors at steel, mining and power sites without duplicate spend.
Gearbox Diagnostics: Tooth Wear, Pitting and Misalignment Before Shutdown
How to catch gear tooth wear, pitting and misalignment before an emergency stop. SDT 340 ultrasound walkdowns plus Artesis e-MCM on the drive motor — field experience from mining and metallurgy in Kazakhstan.