Supply in Kazakhstan
KEG TRK supplies vibration monitoring and analysis solutions (Bently Nevada) across Kazakhstan: Almaty, Astana, Karaganda, Ust-Kamenogorsk, Aktobe and other regions. Official warranty, monitoring system design, installation, commissioning and personnel training.
Mining equipment
Key features
Applications and resources
Industry solutions, landing pages and articles about 3500/20 Rack Interface Module (RIM)
Where it is used
Typical tasks
- Communication with external systems
- System 1 integration
- TDXnet, TDIX, DDIX processor connection
Integrated monitoring: ultrasonic diagnostics · motor monitoring · implementation services
Description
Bently Nevada 3500/20 — 3500 monitoring module. KEG TRK supplies, commissions and supports vibration monitoring in Kazakhstan.
Key features
- Primary communication interface
- Support for all external communications
- Internal rack monitoring
- Hot-swappable support
Applications
- Communication with external systems
- System 1 integration
- TDXnet, TDIX, DDIX processor connection
Supply in Kazakhstan
KEG TRK supplies, commissions and supports 3500/20 with System 1 integration across Kazakhstan.
Technical specifications
| Interfaces | RS232 (front panel), RS232/RS422 and internal modem on the I/O module; no Ethernet |
| Data rate | up to 38.4 kbaud (RS232/RS422), 14.4 kbaud (modem) |
| Slot | slot 1 next to the power supplies; one RIM per rack |
| Power | 4.75 W typical |
| Relays | Rack OK relay, 5 A at 24 Vdc / 120 Vac, always normally energized |
| Status | legacy model; in new racks the 3500/22M TDI with Ethernet and USB takes over the RIM functions |
| Bently Nevada part number | 3500/20 |
Applications
Manufacturer
Bently Nevada
Bently Nevada 3500 monitoring module for vibration and condition monitoring — supply and service in Kazakhstan.
Key specifications
- Interfaces
- RS232 (front panel), RS232/RS422 and internal modem on the I/O module; no Ethernet
- Data rate
- up to 38.4 kbaud (RS232/RS422), 14.4 kbaud (modem)
- Slot
- slot 1 next to the power supplies; one RIM per rack
- Power
- 4.75 W typical
- Relays
- Rack OK relay, 5 A at 24 Vdc / 120 Vac, always normally energized
Official supplier in Kazakhstan
Related products
3500/05 System Rack
3500/05 rack: 14 monitor slots, versions for 19" rails, panel cutout and bulkhead mounting
- 14 monitor slots + power supply and TDI positions; 12" mini rack — 7 slots
- 19" EIA rails, panel cutout, bulkhead
3500/15 AC and DC Power Supply
3500/15 half-height power supply: AC 85–264 V or DC, one or two per rack with automatic backup
- universal AC 85–264 Vac; DC 88–140 Vdc; low-voltage DC 20–30 Vdc
- one or two supplies in the left slot; lower is primary, upper is backup, switchover without interruption
System 1 — condition monitoring platform
Flagship Bently Nevada condition monitoring and diagnostics platform
- All Bently Nevada systems + third-party systems
- ML, AI, Root Cause Analysis
Need advice?
Our specialists will help you choose the optimal 3500/20 Rack Interface Module (RIM) configuration for your equipment.
Related articles
All articles →
10 Equipment Maintenance Strategies That Cut Downtime in 2026
10 maintenance strategies that genuinely reduce downtime in 2026: predictive maintenance, RCM, TPM, and tools like Artesis e-MCM and SDT340, with KPIs you can roll out in stages at plants across Kazakhstan.
Shaft Misalignment: the Hidden Killer of Bearings, Couplings and Seals
Up to half of all rotating equipment failures are linked to shaft misalignment. We break down the types of misalignment, its consequences, and how vibration analysis and current analysis detect it before it destroys couplings and bearings.
What an Hour of Downtime Really Costs and How to Cut Unplanned Stops
Unplanned downtime costs far more than the repair crew's payroll line suggests. We break down the full cost-of-downtime formula and show how switching to predictive maintenance cuts unplanned stops by 30–50%.
4 Stages of Bearing Failure: How to Catch a Defect Months Before It Fails
A bearing doesn't fail instantly — it goes through 4 stages of degradation, and the first one is only visible to ultrasound. We break down the P-F curve and which diagnostic method works at each stage of bearing failure.
The Mysterious 0.6× Frequency — a Frequency That Shouldn't Exist (But Does)
A peak at 0.6× in the spectrum isn't always BPFO. A thought experiment on changing reference frames, and how to confirm the hypothesis with SDT340 ultrasound and Artesis electrical signatures.
Gearbox Diagnostics: Tooth Wear, Pitting and Misalignment Before Shutdown
How to catch gear tooth wear, pitting and misalignment before an emergency stop. SDT 340 ultrasound walkdowns plus Artesis e-MCM on the drive motor — field experience from mining and metallurgy in Kazakhstan.