Supply in Kazakhstan
KEG TRK supplies vibration monitoring and analysis solutions (Bently Nevada) across Kazakhstan: Almaty, Astana, Karaganda, Ust-Kamenogorsk, Aktobe and other regions. Official warranty, monitoring system design, installation, commissioning and personnel training.
Mining equipment
Key features
Applications and resources
Industry solutions, landing pages and articles about 3500/05 System Rack
Where it is used
Typical tasks
- 3500 system installation
- Industrial installations
- Equipment protection
Integrated monitoring: ultrasonic diagnostics · motor monitoring · implementation services
Description
The 3500/05 rack is the base of the Bently Nevada 3500 system. Every module plugs into the rack backplane and consists of a main module at the front and an I/O module at the rear (above it on the bulkhead version). The rack comes in 19" EIA rail, panel cutout and bulkhead versions.
The left positions are reserved for one or two 3500/15 power supplies and the 3500/22M TDI. The other 14 slots take monitors, relay modules, Keyphasor modules, communication gateways and the display in any combination.
Specifications (datasheet 162096)
| Parameter | Value |
|---|---|
| Slots | 14 monitor slots + power supply and TDI positions; 12" mini rack — 7 slots |
| Mounting | 19" EIA rails, panel cutout, bulkhead |
| Dimensions | depth 349 mm (standard), 267 mm (bulkhead); internal barriers add 74 mm |
| Protection | NEMA 4 / 4X with the 3500/06 weatherproof housing (ordered separately) |
Supply in Kazakhstan
KEG TRK supplies the 3500/05 and its I/O modules and helps with 3500 rack configuration and commissioning across Kazakhstan.
Technical specifications
| Slots | 14 monitor slots + power supply and TDI positions; 12" mini rack — 7 slots |
| Mounting | 19" EIA rails, panel cutout, bulkhead |
| Dimensions | depth 349 mm (standard), 267 mm (bulkhead); internal barriers add 74 mm |
| Protection | NEMA 4 / 4X with the 3500/06 weatherproof housing (ordered separately) |
| Bently Nevada part number | 3500/05 |
Applications
Manufacturer
Bently Nevada
3500/05 rack: 14 monitor slots, versions for 19" rails, panel cutout and bulkhead mounting
Key specifications
- Slots
- 14 monitor slots + power supply and TDI positions; 12" mini rack — 7 slots
- Mounting
- 19" EIA rails, panel cutout, bulkhead
- Dimensions
- depth 349 mm (standard), 267 mm (bulkhead); internal barriers add 74 mm
- Protection
- NEMA 4 / 4X with the 3500/06 weatherproof housing (ordered separately)
- Bently Nevada part number
- 3500/05
Official supplier in Kazakhstan
Related products
3500/15 AC and DC Power Supply
3500/15 half-height power supply: AC 85–264 V or DC, one or two per rack with automatic backup
- universal AC 85–264 Vac; DC 88–140 Vdc; low-voltage DC 20–30 Vdc
- one or two supplies in the left slot; lower is primary, upper is backup, switchover without interruption
3500/20 Rack Interface Module (RIM)
Bently Nevada 3500 monitoring module for vibration and condition monitoring — supply and service in Kazakhstan.
- RS232 (front panel), RS232/RS422 and internal modem on the I/O module; no Ethernet
- up to 38.4 kbaud (RS232/RS422), 14.4 kbaud (modem)
3500/42M Proximitor/Seismic Monitor
3500/42M Proximitor/Seismic Monitor: 4 channels for proximity and seismic sensors, vibration and position, 4–20 mA outputs
- 4 channels, programmed in pairs
- proximity and seismic transducers (accelerometers, velocity sensors)
Need advice?
Our specialists will help you choose the optimal 3500/05 System Rack configuration for your equipment.
Related articles
All articles →
10 Equipment Maintenance Strategies That Cut Downtime in 2026
10 maintenance strategies that genuinely reduce downtime in 2026: predictive maintenance, RCM, TPM, and tools like Artesis e-MCM and SDT340, with KPIs you can roll out in stages at plants across Kazakhstan.
Shaft Misalignment: the Hidden Killer of Bearings, Couplings and Seals
Up to half of all rotating equipment failures are linked to shaft misalignment. We break down the types of misalignment, its consequences, and how vibration analysis and current analysis detect it before it destroys couplings and bearings.
What an Hour of Downtime Really Costs and How to Cut Unplanned Stops
Unplanned downtime costs far more than the repair crew's payroll line suggests. We break down the full cost-of-downtime formula and show how switching to predictive maintenance cuts unplanned stops by 30–50%.
4 Stages of Bearing Failure: How to Catch a Defect Months Before It Fails
A bearing doesn't fail instantly — it goes through 4 stages of degradation, and the first one is only visible to ultrasound. We break down the P-F curve and which diagnostic method works at each stage of bearing failure.
The Mysterious 0.6× Frequency — a Frequency That Shouldn't Exist (But Does)
A peak at 0.6× in the spectrum isn't always BPFO. A thought experiment on changing reference frames, and how to confirm the hypothesis with SDT340 ultrasound and Artesis electrical signatures.
Gearbox Diagnostics: Tooth Wear, Pitting and Misalignment Before Shutdown
How to catch gear tooth wear, pitting and misalignment before an emergency stop. SDT 340 ultrasound walkdowns plus Artesis e-MCM on the drive motor — field experience from mining and metallurgy in Kazakhstan.