Supply in Kazakhstan
KEG TRK supplies vibration monitoring and analysis solutions (Bently Nevada) across Kazakhstan: Almaty, Astana, Karaganda, Ust-Kamenogorsk, Aktobe and other regions. Official warranty, monitoring system design, installation, commissioning and personnel training.
Mining equipment
Key features
Applications and resources
Industry solutions, landing pages and articles about 3500/46M Hydro Monitor
Where it is used
Typical tasks
- Hydro turbines
- Hydro generators
- Guide bearings
Integrated monitoring: ultrasonic diagnostics · motor monitoring · implementation services
Description
The 3500/46M Hydro Monitor is a four-channel 3500 rack monitor for hydro turbines and generators. It accepts proximity, air gap, seismic and dynamic pressure sensors and measures vibration, position, and static and dynamic pressure.
Multimode channels hold up to eight sets of setpoints and delays. The monitor switches between them via contacts on the I/O module or a command through a communication gateway when the unit changes mode, for example from generating to pumping.
Specifications (datasheet 144408)
| Parameter | Value |
|---|---|
| Channels | 4 channels, programmed in pairs |
| Inputs | proximity, seismic, dynamic pressure and air gap sensors |
| Measurements | Hydro Radial Vibration, Air Gap, Velocity, Acceleration, Thrust, Stator End Winding; multimode channels |
| Applications | hydro units at 100 rpm and below; up to 8 alarm sets per machine mode |
Supply in Kazakhstan
KEG TRK supplies the 3500/46M and its I/O modules and helps with 3500 rack configuration and commissioning across Kazakhstan.
Technical specifications
| Channels | 4 channels, programmed in pairs |
| Inputs | proximity, seismic, dynamic pressure and air gap sensors |
| Measurements | Hydro Radial Vibration, Air Gap, Velocity, Acceleration, Thrust, Stator End Winding; multimode channels |
| Applications | hydro units at 100 rpm and below; up to 8 alarm sets per machine mode |
| Bently Nevada part number | 3500/46M |
Applications
Manufacturer
Bently Nevada
3500/46M Hydro Monitor: 4 channels, vibration, air gap, thrust, multimode alarm setpoints
Key specifications
- Channels
- 4 channels, programmed in pairs
- Inputs
- proximity, seismic, dynamic pressure and air gap sensors
- Measurements
- Hydro Radial Vibration, Air Gap, Velocity, Acceleration, Thrust, Stator End Winding; multimode channels
- Applications
- hydro units at 100 rpm and below; up to 8 alarm sets per machine mode
- Bently Nevada part number
- 3500/46M
Official supplier in Kazakhstan
Related products
2300 Series — hydro turbine monitoring
Specialized monitoring for hydro turbines and hydrogenerators
- Hydro turbines, hydrogenerators
- Shaft vibration, bearing vibration, gaps
3500/42M Proximitor/Seismic Monitor
3500/42M Proximitor/Seismic Monitor: 4 channels for proximity and seismic sensors, vibration and position, 4–20 mA outputs
- 4 channels, programmed in pairs
- proximity and seismic transducers (accelerometers, velocity sensors)
System 1 — condition monitoring platform
Flagship Bently Nevada condition monitoring and diagnostics platform
- All Bently Nevada systems + third-party systems
- ML, AI, Root Cause Analysis
Need advice?
Our specialists will help you choose the optimal 3500/46M Hydro Monitor configuration for your equipment.
Related articles
All articles →
Case Study: 12-Month PdM Rollout at a Mine and CHP — Artesis, Bently and SDT
Typical holding scenario: SDT routes, Orbit DCM on conveyors, e-MCM on mills, e-PCM on DGS, IoT for management — timeline, metrics and lessons.
Integrated PdM on One Site: Artesis + Bently Nevada + SDT
Three KEG TRK pillars on one plant: Bently vibration on turbo-machinery, SDT ultrasound on routes, Artesis ESA on motors and generators — zone matrix, workflow and architecture.
3500/42M Module on CHP Auxiliary Equipment — Bently Nevada
Combined heat and power auxiliary equipment: feed pumps, ID fans, FD fans, coal mills — applying Bently Nevada 3500/42M, DCS integration and how it differs from main turbine protection.
Vibration Monitoring of Power Transformer Cooling Auxiliaries at CHP Plants
Oil pumps, radiator fans and water-cooling pumps on step-up transformers are a hidden CHP outage source. Bently Nevada 3500/42M, Orbit DCM and 1900/65A for transformer yard auxiliaries.
Integrated Monitoring of CHP Transformer Bays: Rapidox, Vibration and Ultrasound
A CHP transformer bay is transformer, breakers, cooling and switchgear in one reliability loop. How to unify Rapidox (SF₆, O₂, Clean Air), Bently on oil pumps and SDT for partial discharges in one procedure.
Online vs Route-Based Vibration Monitoring at CHP Plants — Bently Nevada
When a CHP needs a 3500 rack, when Orbit DCM or SCOUT routes are enough: comparing online and periodic vibration monitoring of auxiliary equipment at thermal power plants.