Supply in Kazakhstan
KEG TRK supplies vibration monitoring and analysis solutions (Bently Nevada) across Kazakhstan: Almaty, Astana, Karaganda, Ust-Kamenogorsk, Aktobe and other regions. Official warranty, monitoring system design, installation, commissioning and personnel training.
Mining equipment
Key features
Applications and resources
Industry solutions, landing pages and articles about 3500/50M Tachometer Module
Where it is used
Typical tasks
- RPM measurement
- Overspeed protection
- Speed-based compensation
Integrated monitoring: ultrasonic diagnostics · motor monitoring · implementation services
Description
The 3500/50M Tachometer is a two-channel 3500 rack module that uses proximity probes or magnetic pickups to determine shaft speed, rotor acceleration and direction, and alarms on setpoints. Zero speed and reverse rotation modes use both channels.
Specifications (datasheet 141538)
| Parameter | Value |
|---|---|
| Channels | 2 channels |
| Input | proximity probes or magnetic pickups |
| Measurements | speed, rotor acceleration, zero speed, reverse rotation; peak hold |
| Output | can supply Keyphasor signals to the backplane instead of a 3500/25 |
| Status | not intended for overspeed protection — use the 3701/55 |
Supply in Kazakhstan
KEG TRK supplies the 3500/50M and its I/O modules and helps with 3500 rack configuration and commissioning across Kazakhstan.
Technical specifications
| Channels | 2 channels |
| Input | proximity probes or magnetic pickups |
| Measurements | speed, rotor acceleration, zero speed, reverse rotation; peak hold |
| Output | can supply Keyphasor signals to the backplane instead of a 3500/25 |
| Status | not intended for overspeed protection — use the 3701/55 |
| Bently Nevada part number | 3500/50M |
Applications
Manufacturer
Bently Nevada
3500/50M Tachometer Module: 2 channels, speed, rotor acceleration, zero speed, reverse rotation
Key specifications
- Channels
- 2 channels
- Input
- proximity probes or magnetic pickups
- Measurements
- speed, rotor acceleration, zero speed, reverse rotation; peak hold
- Output
- can supply Keyphasor signals to the backplane instead of a 3500/25
- Status
- not intended for overspeed protection — use the 3701/55
Official supplier in Kazakhstan
Related products
3500/25 Enhanced Keyphasor Module
3500/25 Keyphasor module: 2 channels, proximity probes or magnetic pickups, phase reference for all rack monitors
- 2 channels per half-height module; up to 4 Keyphasor signals per rack (up to 8 paired)
- proximity probes and magnetic pickups; isolated I/O for magnetic pickups
3300 XL Series — Eddy-Current Proximity Transducer System
3300 XL eddy-current proximity probes for radial vibration, axial position and gap
- 8mm, 11mm, 25mm, 50mm
- 2.0 mm (80 mil) linear range
Need advice?
Our specialists will help you choose the optimal 3500/50M Tachometer Module configuration for your equipment.
Related articles
All articles →
Vibration Monitoring of Rolling Mill Auxiliary Drives — Bently Nevada
How to protect auxiliary rolling mill drives — roll tables, shears, coilers, lube pumps — with Bently Nevada 3500/42M and Orbit DCM. Measurement points, typical faults and downtime economics in metallurgy.
Fan and Induced Draft Fan Monitoring in Metallurgical Shops — Bently Nevada
Fans and ID fans in blast furnace, steelmaking and rolling production: 3300 XL proximity, Velomitor, Orbit DCM and 3500. Typical faults, measurement points and protection from sudden failure.
3300 XL Eddy Current Probes on Large Fans — Bently Nevada
When a casing sensor is not enough: radial and axial shaft monitoring on large fans and ID fans with 3300 XL, Proximitor and 3500. Installation, calibration and gap interpretation.
Predictive Maintenance of Metallurgy Gearboxes: Spectral Analysis — Bently Nevada
Tooth wear, pitting and misalignment in rolling mill and metallurgical conveyor gearboxes — how Bently Nevada spectral analysis and System 1 detect faults weeks before failure.
Bearing Monitoring on Auxiliary Motor Drives — Bently Nevada
Rolling element bearing units on auxiliary motors at metallurgical, mining and power sites: 330400 accelerometers, Orbit DCM, SCOUT and early BPFO/BPFI signs in the spectrum.
10 Equipment Maintenance Strategies That Cut Downtime in 2026
10 maintenance strategies that genuinely reduce downtime in 2026: predictive maintenance, RCM, TPM, and tools like Artesis e-MCM and SDT340, with KPIs you can roll out in stages at plants across Kazakhstan.