Clean Air and Oxygen in SF₆-Free Switchgear: Monitoring at CHP During the SF₆ Transition
New dry-air (Clean Air) switchgear at CHP plants needs O₂, humidity and purity control. Rapidox 6100 Clean Air Pumpback for mixed SF₆ and SF₆-free fleets.
⚠️ EN version — draft. Ready to publish once kk/en routing (i18n) is implemented across the site.
Utilities are migrating MV switchgear to SF₆-free Clean Air insulation. On a single CHP plant, legacy SF₆ cells and new dry-air cubicles coexist for years — one analyser fleet is preferable to two.
Rapidox 6100 Clean Air Pumpback measures both SF₆ and dry air with pump-back (zero emission sampling). For Clean Air, oxygen and dew point are primary indicators; O₂ drift with stable pressure signals seal problems or incorrect nitrogen commissioning.
Typical CHP rollout: fleet audit → baseline records per cell → one 6100 + Hose Kit → align with SF₆ test procedure and PD ultrasound.
Before confined entry, check O₂ — see oxygen displacement in GIS. Scope: thermal power plants; not oil & gas.
Request a demo of Rapidox 6100 Clean Air on site.
Equipment in this article
Rapidox 6100 Clean Air Pumpback - Анализатор сухого воздуха и SF6
Газоанализатор для анализа сухого воздуха и элегаза SF6 с функцией возврата газа
Rapidox SF6 6100 Pump Back - Газоанализатор с возвратом газа
Полностью автоматический газоанализатор элегаза с функцией возврата газа в обору...
Rapidox SF6 6100 - Портативный газоанализатор элегаза
Портативный газоанализатор для измерения влажности, чистоты и продуктов разложен...
SF6 Hose Connection Kit - Набор шланговых соединений для элегаза
Универсальный набор переходников RECTUS 21 для подключения газоанализаторов SF6 ...
Read also
4/6/2026
How to Test SF6 Gas Quality at a Substation: Step-by-Step Guide
Moisture, decomposition products and pressure loss in HV breakers and GIS — what to measure, IEC limits and how Rapidox analyzers sample SF6 without venting the compartment.
6/26/2026
Transformer DGA at CHP: What to Add Beyond Oil Chromatography
Dissolved gas analysis (DGA) is the gold standard for transformer diagnosis but not the only tool. Companion methods at CHP plants: cooling vibration, PD ultrasound, SF₆ and O₂ on adjacent switchgear.
6/26/2026
Oxygen Depletion in Enclosed MV Switchgear: O₂ and SF₆ Monitoring at CHP Substations
SF₆ leaks in enclosed switchgear displace oxygen below safe levels with no smell or visible warning. How to combine SF₆ and O₂ monitoring with Rapidox at combined heat and power substations.