Supply in Kazakhstan
KEG TRK supplies measurement instrumentation solutions (ELEMER) across Kazakhstan: Almaty, Astana, Karaganda, Ust-Kamenogorsk, Aktobe and other regions. Official warranty, monitoring system design, installation, commissioning and personnel training.
Key features
Applications and resources
Industry solutions, landing pages and articles about Electromagnetic Flow Meters
Where it is used
Typical tasks
- Chemically aggressive and abrasive liquids
- Water of various origins, wastewater
- Food industry (milk, juices, drinking water)
- Produced water metering in oil production (water injection)
Description
ELEMER-REM electromagnetic flow meters are designed for measuring and continuously converting the volumetric flow and volume of conductive liquids into unified output signals, accounting for forward and reverse flow direction.
Nominal diameter range is DN 15-400 mm, operating pressure up to 4.0 MPa, measurement accuracy up to ±0.2%. Available as the base ELEMER-REM model, a food-industry version (milk, juices, drinking water), and ELEMER-REM VI for produced water metering in reservoir pressure maintenance. Output signals include frequency, pulse, and 4-20 mA, with HART v.7 and Modbus RTU protocol support.
Technical specifications
| Diameters (DN) | 15-400 mm |
| Pressure (PN) | 1.6 / 2.5 / 4.0 MPa |
| Media temperature | -40...+150 °C |
| Minimum conductivity | 2x10^-4 S/m |
| Measurement accuracy | ±0.2% / ±0.5% / ±1.0% / ±2.0% |
| Protection rating | IP67, IP68 (primary sensor) |
| Output signals | frequency (0-10 kHz), pulse, 4-20 mA, discrete/relay |
| Digital protocol | HART v.7, Modbus RTU |
| Power supply | 24 V DC, ~220 V 50 Hz |
| Dynamic range | up to 1:200 |
| Calibration interval | 5 years |
Applications
Certificates and approvals
- ✓Type approval certificate No. 74824-19
- ✓INTI conclusions
- ✓FieldComm Group registration (HART)
- ✓Explosion-proof version Exd
- ✓Compliance with TR CU 004/2011, 012/2011, 020/2011, 032/2013
- ✓Recognized in Belarus, Kazakhstan, Uzbekistan
Manufacturer
ELEMER
ELEMER-REM electromagnetic flow meters for conductive liquids, DN 15-400 mm
Key specifications
- Diameters (DN)
- 15-400 mm
- Pressure (PN)
- 1.6 / 2.5 / 4.0 MPa
- Media temperature
- -40...+150 °C
- Minimum conductivity
- 2x10^-4 S/m
- Measurement accuracy
- ±0.2% / ±0.5% / ±1.0% / ±2.0%
Official supplier in Kazakhstan
Related products
Electromagnetic Flow Meter ELEMER-REM-2 420
Electromagnetic flow meter ELEMER-REM-2 420 - DN 15-400 mm, Exd explosion protection, in-situ verifi...
ELEMER
Vortex Flow Meters
ELEMER-RV vortex flow meters for gas, steam and liquids, DN 25-300 mm, pressure up to 25 MPa
ELEMER
Differential Pressure Sensor AIR-10-DD
Differential pressure sensor AIR-10-DD for flow meters - 8 ranges, 4-20 mA output
ELEMER
Need advice?
Our specialists will help you choose the optimal Electromagnetic Flow Meters configuration for your equipment.