Supply in Kazakhstan
KEG TRK supplies measurement instrumentation solutions (ELEMER) across Kazakhstan: Almaty, Astana, Karaganda, Ust-Kamenogorsk, Aktobe and other regions. Official warranty, monitoring system design, installation, commissioning and personnel training.
Key features
Applications and resources
Industry solutions, landing pages and articles about Heat Energy, Gas and Steam Meter ELEMER-ST-365
Where it is used
Typical tasks
- Custody transfer metering of heat energy
- Open and closed heat supply systems
- Gas and steam flow metering
- Individual heating substations
Description
ELEMER-ST-365 is a heat computer by ELEMER for custody transfer metering of heat energy quantity, flow, volume and mass of water, steam, gas and gas mixtures in open and closed heat supply systems, cooling systems and individual pipelines. The device measures signals from primary flow, differential pressure and temperature transmitters, converts them into physical quantities, and calculates flow, quantity and heat energy.
Operates together with ELEMER-REM/REM-2 electromagnetic flow meters, ELEMER-RV vortex flow meters, and AIR-series temperature and pressure sensors. Operating temperature range is from 0...+350 °C (water) to +100...+600 °C (steam), pressure up to 30-35 MPa. Calculations are performed per GOST 30319-2015 and methods MI 2412-97, MI 2451-98, MI 2714-2002. The device stores a non-volatile archive of hourly, daily and monthly data.
Technical specifications
| Temperature (water) | 0...+350 °C |
| Temperature (steam) | +100...+600 °C |
| Temperature (gas) | -73...+350 °C |
| Pressure | 0.1...30/35 MPa (depending on media) |
| Flow | 0.033...847,800 m3/h (depending on media and DN) |
| Temperature measurement error | ±(0.6 + 0.004x|t|) °C |
| Heat energy measurement error | ±(2...3 + 12/dt + 0.01...0.02xGmax/G)% |
| Gas volume measurement error | ±1.2...±3.9% |
| Time measurement error | ±0.01% |
| Configuration | ELEMER-REM/REM-2, ELEMER-RV flow meters, AIR temperature and pressure sensors |
Applications
Certificates and approvals
- ✓Type approval certificate No. 81274-21 (valid until 15.03.2031)
- ✓Recognized in Kazakhstan No. 1368
Manufacturer
ELEMER
Heat computer ELEMER-ST-365 for custody transfer metering of heat energy, gas and steam
Key specifications
- Temperature (water)
- 0...+350 °C
- Temperature (steam)
- +100...+600 °C
- Temperature (gas)
- -73...+350 °C
- Pressure
- 0.1...30/35 MPa (depending on media)
- Flow
- 0.033...847,800 m3/h (depending on media and DN)
Official supplier in Kazakhstan
Related products
Electromagnetic Flow Meters
ELEMER-REM electromagnetic flow meters for conductive liquids, DN 15-400 mm
ELEMER
Vortex Flow Meters
ELEMER-RV vortex flow meters for gas, steam and liquids, DN 25-300 mm, pressure up to 25 MPa
ELEMER
Universal Flow Computer ELEMER-VKM-360
Flow computer ELEMER-VKM-360A/B - up to 10 pipelines, supports water, steam, gas, oil
ELEMER
Need advice?
Our specialists will help you choose the optimal Heat Energy, Gas and Steam Meter ELEMER-ST-365 configuration for your equipment.