Supply in Kazakhstan
KEG TRK supplies measurement instrumentation solutions (ELEMER) across Kazakhstan: Almaty, Astana, Karaganda, Ust-Kamenogorsk, Aktobe and other regions. Official warranty, monitoring system design, installation, commissioning and personnel training.
Key features
Applications and resources
Industry solutions, landing pages and articles about ELEMER Vibrating Level and Flow Switch
Where it is used
Typical tasks
- Liquid level control in tanks
- Flow signaling in pipelines
- Oil, gas and chemical industry
Description
The ELEMER vibrating level and flow switch detects the presence of liquid at a set level or the flow velocity of liquid and gaseous media using a vibrating probe principle. It is designed to signal limit conditions in tanks and pipelines.
The immersion probe length ranges from 40 to 3000 mm, and the device is rated for process pressure up to 16 MPa and temperature from -50 to +150 C. The flow signaling range is 0.003-1.5 m/s for liquids and 0.3-150 m/s for gases. The output signal is generated by two independent adjustable relays. General industrial and explosion-proof (Exd) versions are available.
Technical specifications
| Versions | general industrial, Exd |
| Controlled medium | liquid, gas |
| Flow signaling range (liquid media) | 0.003-1.5 m/s |
| Flow signaling range (gaseous media) | 0.3-150 m/s |
| Immersion probe length | 40-3000 mm |
| Maximum process pressure | 16 MPa |
| Process temperature range | -50...+150 C |
| Supply voltage | 24 V DC; 220 V AC |
| Output signal | 2 independent adjustable relays |
Applications
Certificates and approvals
- ✓ELEMER technical documentation
Manufacturer
ELEMER
Vibrating liquid level and flow switch - pressure up to 16 MPa, temperature up to +150 C
Key specifications
- Versions
- general industrial, Exd
- Controlled medium
- liquid, gas
- Flow signaling range (liquid media)
- 0.003-1.5 m/s
- Flow signaling range (gaseous media)
- 0.3-150 m/s
- Immersion probe length
- 40-3000 mm
Official supplier in Kazakhstan
Related products
ELEMER-M1L Float-Potentiometric Level Gauge
M1L float-potentiometric level gauge for liquids, mounting length up to 6000 mm
ELEMER
Signal Conversion and Control Unit ELEMER-BPRS-51
ELEMER-BPRS-51 signal conversion and control unit - 4-20 mA + HART, microprocessor-based
ELEMER
Differential Pressure Sensor AIR-10-DD
Differential pressure sensor AIR-10-DD for flow meters - 8 ranges, 4-20 mA output
ELEMER
Need advice?
Our specialists will help you choose the optimal ELEMER Vibrating Level and Flow Switch configuration for your equipment.