Supply in Kazakhstan
KEG TRK supplies vibration monitoring and analysis solutions (Bently Nevada) across Kazakhstan: Almaty, Astana, Karaganda, Ust-Kamenogorsk, Aktobe and other regions. Official warranty, monitoring system design, installation, commissioning and personnel training.
Mining equipment
Key features
Applications and resources
Industry solutions, landing pages and articles about 3500/60 Temperature Monitor - 6-Channel Temperature Monitor
Where it is used
Typical tasks
- Bearing temperature
- Oil temperature
- Winding temperature
Integrated monitoring: ultrasonic diagnostics · motor monitoring · implementation services
Documentation
Official Baker Hughes / Bently Nevada manufacturer PDFs. Key specifications are also published on this page for search and equipment selection.
Description
The 3500/60 Temperature Monitor is a 6-channel module for temperature monitoring using RTD and thermocouple sensors. It is used to monitor the temperature of bearings, oil, and other equipment components.
Key specifications
Inputs
- RTD inputs - Pt100, Pt1000 (2-wire, 3-wire, 4-wire)
- Thermocouple - Type J, K
- 6 channels independent monitoring
Measurements
- Temperature - °C or °F
- Accuracy - ±1°C (RTD), ±2°C (TC)
- Range - -200 to +850°C (depends on sensor)
Outputs
- 4-20 mA - per channel
- Relay outputs - 4 shared
- Data interface - communication
Technical specifications
| Parameter | Value |
|---|---|
| Channels | 6 |
| Sensor types | RTD (Pt100/1000), TC (J/K) |
| RTD range | -200 to +850°C |
| TC range | 0 to +1200°C (Type K) |
| RTD accuracy | ±1°C |
| TC accuracy | ±2°C |
| 4-20 mA | Configurable range |
Applications
Bearings
- Journal bearing - babbit temperature
- Thrust bearing - pad temperature
- Guide bearings - guide temperature
Oil and fluids
- Lube oil - oil temperature
- Cooling water - cooling water temperature
- Hydraulic oil - hydraulic fluid temperature
Electric motors
- Stator winding - winding temperature
- Bearing - bearing temperature
Advantages
- Versatility - RTD and thermocouple
- Accuracy - high accuracy for RTD
- Integration - part of the 3500 system
- Alarms - dual setpoint protection
Technical specifications
| channels | 6 temperature channels |
| inputs | RTD (100Ω Pt), Thermocouple (J, K) |
| accuracy | ±1°C (RTD), ±2°C (TC) |
| outputs | 4-20 mA, Relay, Data |
| Bently Nevada part number | 3500/60 |
Applications
Manufacturer
Bently Nevada
6-channel temperature monitor for RTD and thermocouple inputs
Key specifications
- channels
- 6 temperature channels
- inputs
- RTD (100Ω Pt), Thermocouple (J, K)
- accuracy
- ±1°C (RTD), ±2°C (TC)
- outputs
- 4-20 mA, Relay, Data
- Bently Nevada part number
- 3500/60
Official supplier in Kazakhstan
Related products
Need advice?
Our specialists will help you choose the optimal 3500/60 Temperature Monitor - 6-Channel Temperature Monitor configuration for your equipment.
Related articles
All articles →
10 Equipment Maintenance Strategies That Cut Downtime in 2026
10 maintenance strategies that genuinely reduce downtime in 2026: predictive maintenance, RCM, TPM, and tools like Artesis e-MCM and SDT340, with KPIs you can roll out in stages at plants across Kazakhstan.
Shaft Misalignment: the Hidden Killer of Bearings, Couplings and Seals
Up to half of all rotating equipment failures are linked to shaft misalignment. We break down the types of misalignment, its consequences, and how vibration analysis and current analysis detect it before it destroys couplings and bearings.
What an Hour of Downtime Really Costs and How to Cut Unplanned Stops
Unplanned downtime costs far more than the repair crew's payroll line suggests. We break down the full cost-of-downtime formula and show how switching to predictive maintenance cuts unplanned stops by 30–50%.
4 Stages of Bearing Failure: How to Catch a Defect Months Before It Fails
A bearing doesn't fail instantly — it goes through 4 stages of degradation, and the first one is only visible to ultrasound. We break down the P-F curve and which diagnostic method works at each stage of bearing failure.
The Mysterious 0.6× Frequency — a Frequency That Shouldn't Exist (But Does)
A peak at 0.6× in the spectrum isn't always BPFO. A thought experiment on changing reference frames, and how to confirm the hypothesis with SDT340 ultrasound and Artesis electrical signatures.
Gearbox Diagnostics: Tooth Wear, Pitting and Misalignment Before Shutdown
How to catch gear tooth wear, pitting and misalignment before an emergency stop. SDT 340 ultrasound walkdowns plus Artesis e-MCM on the drive motor — field experience from mining and metallurgy in Kazakhstan.