Olympus / Evident
Non-destructive testing and industrial visual inspection: thickness gauges, UT/PAUT, eddy current, bond testing and IPLEX
About the company
Olympus Industrial / Evident Scientific instruments set the global standard for NDT and remote visual inspection. Thickness gauges, EPOCH, OmniScan, NORTEC, BondMaster and IPLEX videoscopes serve aviation, oil & gas, power and manufacturing.
KEG TRK supplies Olympus/Evident in Kazakhstan: application selection (corrosion, welds, composites, RVI), delivery and support. Product hubs stay in NDT and endoscope categories — this brand page maps solutions, not duplicate SEO catalogs.
Olympus solutions
Key product directions below. Full instrument catalogs open in the NDT and endoscope sections.
Thickness gauging
27MG, 38DL PLUS, 39DL PLUS, 45MG, 72DL PLUS, Magna-Mike 8600, 35RDC — corrosion, coatings, Hall-effect and composites.
UT and phased array
EPOCH and OmniScan — welds, metals, PAUT and advanced ultrasonic inspection.
Composites and bond testing
BondMaster 600 and NORTEC 600 — honeycomb, laminates and surface flaws.
IPLEX videoscopes
IPLEX One, NX, GX/GT, G Lite, TX II and GAir — from ultra-thin scopes to 20–30 m runs.
Featured instruments in the KEG TRK catalog
Olympus 39DL PLUS — ultrasonic thickness gauge
Flagship corrosion and precision thickness gauge with Wi-Fi, Bluetooth and up to 60 Hz scanning
Olympus OmniScan X3 - Phased Array Flaw Detector
Advanced phased array flaw detector with extended capabilities
Olympus BondMaster 600 — bond tester
Portable multimode bond tester for honeycomb and laminate composites: pitch-catch, resonance and MIA
Olympus IPLEX One — industrial videoscope platform
10th-generation IPLEX software platform with Swoptix, 3DAssist and Plus/Expert/Prime tiers
Olympus IPLEX NX - Industrial Videoscope
Advanced videoscope with high image clarity and Wi-Fi
Olympus IPLEX GAir — long-distance video borescope
20–30 m videoscope with pneumatic articulation for long piping and heat exchangers
Industries
NDT and inspection resources
Instrument selection and industry practice for power, refining, mining and metals sites
Which Olympus thickness gauge to choose
27MG, 38DL, 39DL, 45MG, 72DL — task matrix
Which IPLEX to choose
One, NX, GX/GT, GAir, TX II — length, diameter, measurement
Thickness gauging, EPOCH or PAUT
Which instrument class fits the NDT job
Pipe corrosion at TPP and refineries
How to build a thickness-gauging route
Weld NDT at mining and metals
When EPOCH is enough vs OmniScan
RVI of turbines and heat exchangers
One/NX, GAir and TX II by asset
Select an Olympus / Evident instrument
Describe the material, access and method — thickness, flaw detection, composites or RVI